Manufacturing Unit
 
MANUFACTURING
 
LOCATIONS
Nanz Med Science Pharma (P) Ltd.
Ram Pur Ghat,
Paonta Sahib,
Distt. Sirmour,
Himachal Pradesh (India)
Nanz Med Science Pharma Nanz Med Science Pharma Nanz Med Science Pharma Nanz Med Science Pharma
Nanz Med Science Pharma      
Paonta sahib is located about 300 km from Delhi by National Highway No. 72 and by Rail Network, the nearest Railway station i.e. Dehradun is about 45.0 Km .

      • Nanz unit is located at Village-Rampur Ghat, Paonta Sahib (H.P.). Bus Station is located at about 4.5 km away from the Factory.

      • National Highway No. 72 is about 15.0 km away from the site.

      • Nanz is located on a plot measuring approximately 5000sq. feet.

      • The building comprises of ground floor, first floor and second floor.

      • Raw material store, Packing material store, finished goods store, External products mfg. & packing departments are in ground floor & first floor.

      • Administration department and Quality Control/Quality assurance, Microbiological laboratory and utility are set on ground floor.

      • AHU System is provided having pressure differential to avoid cross contamination.

      • Lobbies having positive pressure compared to manufacturing in external (semi solid dose) department and different air locks having pressure different department to avoid cross contamination.

      •  The site is situated on the banks of river Yamuna and surrounded by agricultural land from all sides and linked to Paonta-Rampur Ghat road at its north end. It is well protected from all sides.

Nanz Medscience Manufacturing site is situated at Rampur Ghat, Poanta Sahib which is about 265km, North of Delhi, 110 km from Chandigarh & 50 km from Dehradun.

The production facility is located in Lush green belt and in clean environment away from polluting industries. The surrounding atmosphere is free from dust & smoke.
SITE LOCATION
Click to Enlarge
Back  »
 
MANUFACTURING APPROVELS
Nanz Medscience has installed, a state of art,cGMP accredited, advanced manufacturing facility for Pharmaceutical Formulations at Rampur Ghat, Poanta Sahib, Distt-Sirmour, Himachal Pradesh, a tax free zone. The entire project has been designed in such a manner that it complies with the cGMP requirements / guidelines of WHO-GMP , US FDA, UK MHRA, MCC South Africa.  

Manufacturing License No. S-MNB/09/41& S-MB/09/42 valid up 26-04-2014 Issued by Drugs Controller cum Licensing Authority H.P. Shimla ,to manufacture for sale drugs specified in Schedule C and C (1) of the drugs and cosmetics act, 1945.
  • The facility has been inspected and approved for "GMP" compliance from the office of Drugs controller-cum-Licensing authority, Solan, Himachal Pradesh, Shimla-9 INDIA.

  • The company has received "Performance Certificate" from the office of Drugs controller-cum-Licensing authority, Solan, Himachal Pradesh, Shimla-9, INDIA.
Back  »
 

INSTALLED CAPACITY

1.NANZ MEDSCIENCE PHARMA (P) LIMITED
Village: Rampur Ghat, Paonta Sahib, Dist. Sirmour (HP) INDIA.
The plant is approximately 300 kilometres from the Delhi Airport. The plant is easily accessible by rail and road.
2.The total area of the site is approx. 5000sq.mt. Built-up area of manufacturing facility is 3300sq.mt.Following is the definite distribution of area for various sections.
Total Plot Area   5000 Sq. Mt.
Covered Area Ground Floor 1035.96 Sq. Mt.
  First Floor 1038.73 Sq. Mt.
  Second Floor 510.30 Sq. Mt.
•The areas for various manufacturing sections are as follows:
Name Of Area Covered Area (approx.)
Production Block (Ground Floor and First Floor) 33,00 sq. mt.
Administrative Block (Ground Floor and First Floor respectively) Adjoining to Production Block
Utility (Service Floor and in Ground Floor) 1200 sq. ft. & 1500 sq.ft. respectively
Microbiology Area (Ground Floor) 26.24 sq. mt.
Finished Goods Store Area (Ground Floor & First Floor) 130.77 sq. mt.
Raw Material Store Area (Ground Floor & First Floor) 210.24 sq. mt.
Packing Material Store Area (Ground Floor & First Floor) 595.89 sq. mt.
Change Rooms Area (Ground Floor & First Floor) 45.48 sq. mt.
3.The site has a well-confined Warehouse (area 936.9 sq. mt.), which is connected with the Production block through a covered inter-connected corridor. It has high-rise racks for the storage of raw material and finished products, and has a separated dispensing. The packing materials are being stored in separate primary & secondary packing stores.
4.The site has an Quality Control Laboratory (area 131.32 Sq. mt.) & Microbiological Laboratory (area 26.24 Sq. mt.), adjoining to Production area, at the Ground floor, to test the raw materials, packing materials, in process samples and finishes products, etc.
5.The site also has a separate utilities / engineering section with boiler, D.G. Sets, Compressed air system, HVAC system, Purified water generation & distribution system, Clean (Pure) steam generator, Dust extraction system etc., for catering the need of the production sections.
6.The site has a separate effluent treatment plant for the treatment of composite effluent. Only treated effluent is discharged from the site. The company complies with the requirement of the HP Pollution Control Board/Central Pollution Control Board.
7.The site has a separate administration area (it has Personnel & Administration Dept. Purchase Dept., Accounts Dept., GM Office, and IT Dept.).
Back  »
 

PLANTS OVERVIEW

NANZ MEDSCIENCE PHARMA PVT. LTD. a global healthcare company, is a subsidiary of Med Science Canada Inc., a multidimensional professionally managed Private limited company engaged in developing, manufacturing and marketing of Quality Pharmaceuticals in the Semi solid, liquid Dosage forms - Creams, Lotions, Gels, Shampoos, Solutions, Scrub, Suspensions, Tooth pastes, Ointments, Gargles, Mouth wash and & trading of Diagnostics, Pharmaceutical Formulations, Specialty Chemicals and Cosmetics for domestic and International Markets.

Specially engaged in the manufacturing of all range of Antiseptic, Disinfectants and External Dental Products.

The Company is having dedicated facility for Manufacturing , filling and Packing of Product containing Povidone Iodine in Solution, Ointment, Cream, Gel, Lotion, Scrub etc.

forms :
The Company also engaged in manufacturing of Active Pharmaceutical Ingredient Povidone Iodine of IP and USP grade at same site at different facility for domestic and overseas countries respectively.

The entire project has been designed in such a manner that it compiles with the cGMP and WHO requirements, Schedule-M requirements of Indian Drugs & Cosmetics Act and other relevant regulations.

The facility houses various departments and provides adequate infrastructure necessary for manufacturing of quality Pharmaceuticals. Manufacturing plant is supported by a well-equipped Quality Control Department and Quality Assurance Department functioning in line with current Quality Management Systems with well trained Qualified Technical Staff.
Back  »
 

PHOTO GALLERY

 
more...
Back  »
Home   |    About Us   |    Products   |    Manufacturing Unit   |    Careers   |    Contact Us   |    Sitemap
Copyright © Nanz-Med-Science (P) Ltd. All Rights Reserved.
Site by: www.rpgwebsolutions.comWebsite is hosted by Sanver E-Solution